• Gateway with the ADSL modem integrated
• An external ADSL modem
• Two independent ADSL Internet connections
Example scenario
Configuration target
• The data traffic is distributed half and half to the two ADSL lines based on IP sessions.
• We shall then take the example of encrypted HTTP connections (HTTPS) to describe
how to effectively avoid any loss of connection that might occur when distributing to dif-
ferent Internet accesses.
Note
When creating the ADSL connections, besides the public IP address, the bintec R3002
also obtains the IP addresses of the DNS servers for resolving the name of the con-
figured Internet provider. Particularly when using different Internet providers, the use of
the DSN servers needs to be connection-specific.
The configuration of the DNS servers is automatically created when you create the
ADSL connections and can be seen in the menu Local SevicesDNSDNS Server.
Overview of Configuration Steps
Set up first Internet connection
Field Menu Value
Connection Type Assistants->Internet Access->Internet
Connections->New
1 350 '
bintec elmeg GmbH
10 Networking
bintec RS Series 257
To Next Page
Loading...
