Fig. 110: Networking->Access Rules->Rule Chains->New
The Networking->Access Rules->Rule Chains->New menu consists of the following
fields:
Fields in the Basic Parameters menu.
Field Description
Rule Chain
Select whether to create a new rule chain or to edit an existing
one.
Possible values:
• )7 (default value): You can create a new rule chain with this
setting.
• B) $ 1 %C: Select an already existing
rule chain, and thus add another rule to it.
Description Enter the name of the rule chain.
Access Filter
Select an IP filter.
If the rule chain is new, select the filter to be set at the first point
of the rule chain.
If the rule chain already exists, select the filter to be attached to
the rule chain.
Action
Define the action to be taken for a filtered data packet.
Possible values:
• 3117 $ $1 % (default value): Allow packet
if it matches the filter.
• 3117 $ $1 %: Allow packet if it
10 Networking bintec elmeg GmbH
280 bintec RS Series
To Next Page
Loading...
