Field Description
this function to be able to enter a value under VLAN ID.
VLAN ID
Only if VLAN is enabled.
Enter the VLAN-ID that you received from your provider.
Always on Select whether the interface should always be activated.
The function is enabled with "1.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Connection Idle
Timeout
Only if Always on is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are to & (seconds). deactivates the
short hold.
The default value is &.
Example: for FTP transmission, for LAN-to-LAN trans-
mission, for Internet connections.
Fields in the IPv4 Settings menu.
Field Description
Security Policy Select the security settings to be used with the interface.
Possible values:
• * : All IP packets are allowed through except for
those which are explicitly prohibited.
• . (default value): Only those packets are transmit-
ted that can be attributed to a connection that has been initi-
ated from a trusted zone.
You can configure exceptions for the selected setting in the
Firewall on page 415 menu.
13 WAN bintec elmeg GmbH
308 bintec RS Series
To Next Page
Loading...
