BinTec RS353a - Page 34

Property bintec RS123 , bintec RS123w, bintec RS353a
and bintec RS353aw
Memory
128 MB RAM,
32 MB Flash-ROM
LEDs
17 (1x Power, 1x Status, 5x2 Ethernet, 5x Function) for
devices with WLAN RS123w and RS353aw
16 (1x Power, 1x Status, 5x2 Ethernet, 4x Function) for
devices without WLAN RS123w and RS353aw
Power consumption of the device 4.7 Watt
Voltage supply AC 100 bis 240 V, 50 bis 60 Hz
Environmental requirements:
Storage temperature -25 °C to +70 °C
Operating temperature 0 °C to +40 °C
Relative atmospheric humidity 10 % to 95 % (non-condensing)
Room classification Only use in dry rooms.
Available interfaces:
Ethernet IEEE 802.3 LAN (4-port switch) Permanently installed (twisted pair only), 10/100/1000
mbps, autosensing, Auto MDIX
Gigabit LAN/WAN Port Permanently installed (twisted pair only), 10/100/1000
mbps, autosensing, Auto MDIX
VDSL2/ADSL2+ Internal VDSL2/ADSL2+ modem for Annex A (RS353a
and RS353aw)
SFP LAN Port SFP Slot for common optical 1000 mbps Ethernet SFP
modules (RS123 and RS123w)
USB Port USB2.0 type A
USB Console (Type B) Supported Baud rates: 1200-115200 (default: 115200
Baud)
Standards & Guidelines
R&TTE Directive 1999/5/EC
CE symbol for all EU states
SAFERNET TM Security Technology Community passwords, PAP, CHAP, MS-CHAP, MS-
CHAP v.2, PPTP, PPPoE, PPPoA, Callback, Access Con-
trol Lists, CLID, NAT, SIF, MPPE Encryption, PPTP En-
cryption, VPN with PPTP or IPSec
Antennas and sockets
Property bintec RS123 bintec RS123w bintec RS353a bintec RS353aw
WLAN inter-
face
-
802.11a/b/g/h;
802.11n 2.4 GHz
-
802.11a/b/g/h;
802.11n 2.4 GHz
1 Installation bintec elmeg GmbH
18 bintec RS Series