Field Description
Enter the ID of your device.
For Authentication Method = 53 # or A3 #
the option Use Subject Name from certificate is dis-
played.
When you enable the option Use Subject Name from certific-
ate, the first alternative subject name indicated in the certificate
is used, or, if none is specified, the subject name of the certific-
ate is used.
Note: If you use certificates for authentication and your certific-
ate contains alternative subject names (see Certificates on
page 99), you must make sure your device selects the first al-
ternative subject name by default. Make sure you and your peer
both use the same name, i.e. that your local ID and the peer ID
your partner configures for you are identical.
Preshared Key Enter the password agreed with the peer.
The maximum length of the entry is 50 characters. All charac-
ters are possible except for ? at the start of the entry.
IP Version of the
tunneled Networks
Select if IPv4, IPv6 or both versions are allowed for the VPN
tunnel.
Possible values:
•
•
•
Fields in the menu IPv4 Interface Routes (appears only for IP Version of the
tunneled Networks = IPv4 or IPv4 and IPv6)
Field Description
Security Policy
Select the security settings to be used with the interface.
Possible values:
• * : All IP packets are allowed through except for
those which are explicitly prohibited.
• . (default value): Only those packets are transmit-
bintec elmeg GmbH
14 VPN
bintec RS Series 357
To Next Page
Loading...
