Fields in the Global Options menu.
Field Description
Enable IPSec Select whether you want to activate IPSec.
The function is enabled with "1.
The function is active as soon as an IPSec Peer is configured.
Delete complete IPSec
configuration
If you click the icon, delete the complete IPSec configuration
of your device.
This cancels all settings made during the IPSec configuration.
Once the configuration is deleted, you can start with a com-
pletely new IPSec configuration.
You can only delete the configuration if Enable IPSec = not ac-
tivated.
IPSec Debug Level Select the priority of the syslog messages of the IPSec subsys-
tem to be recorded internally.
Possible values:
• #%( (highest priority)
• 31
• 6%1
•
• 2#
• )%
• $
• 5"# (default value, lowest priority)
Syslog messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at syslog level "debug".
The Advanced Settings menu is for adapting certain functions and features to the special
requirements of your environment, i.e. mostly interoperability flags are set. The default val-
ues are globally valid and enable your system to work correctly to other bintec elmeg
devices, so that you only need to change these values if the remote terminal is a third-party
product or you know special settings are necessary. These may be needed, for example, if
the remote end operates with older IPSec implementations.
14 VPN bintec elmeg GmbH
388 bintec RS Series
To Next Page
Loading...
