Field Description
• % (default value): You enter a static IP address.
• 3: Only for Connection Type = 0).
Your device dynamically assigns an IP address to the remote
terminal.
• 3: Only for Connection Type = 036. Your
device is dynamically assigned an IP address.
Default Route Only for IP Address Mode = 3
and %
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with "1.
The function is disabled by default.
Create NAT Policy Only for IP Address Mode = 3
and %
Specify whether Network Address Translation (NAT) is to be ac-
tivated for this connection.
The function is enabled with "1.
The function is disabled by default.
IP Assignment Pool
(IPCP)
Only for IP Address Mode = 3
Select an IP pool configured in the WAN->Internet +
Dialup->IP Pools menu.
Local IP Address Only for IP Address Mode = %
Enter the WAN IP address of your device.
Route Entries Only for IP Address Mode = %
Enter Remote IP Address and Netmask of the LANs for L2TP
partners and the corresponding Metric. Add new entries with
Add.
The menu Advanced Settings consists of the following fields:
14 VPN bintec elmeg GmbH
398 bintec RS Series
To Next Page
Loading...
