Field Description
Description
Enter your chosen designation for the action.
Command Type
Select the desired action.
Possible values:
• A" (default value): Your device is rebooted.
• ':/)': The desired value is entered for a MIB variable.
• $% : The status of an interface is modified.
• 21 : Only for devices with a wireless LAN. The
status of a WLAN-SSID is modified.
• $7 .+: A software update is initiated.
• 6$# '#: A configuration file is loaded
onto your device or backed up by your device.
• # *: Accessibility of an IP address is checked.
• 6$% '#: A certificate is to be renewed,
deleted or entered.
• @H 203) :%: Only for devices with a wireless
LAN. A scan of the 5 GHz frequency band is performed.
• @H 203) :%: Only for devices with a wireless
LAN. A scan of the 5.8 GHz frequency range is performed.
• 2068 )7 )#" %: Only for devices with a WLAN
controller. A Neighbor Scan is initiated by the WLAN network
controlled by the WLAN controller.
• 2068 E : Only for devices with a WLAN controller.
The status of a wireless network is modified.
• 203)8 -+ ': The operating mode of a WLAN
radio module is modified.
Event List
Select the event list you want which has been created in Local
Services->Scheduling->Trigger.
Event List Condition
For the selected chains of events, select how many of the con-
figured events must occur for the operation to be initiated.
Possible values:
• 311 (default value): The operation is initiated if all events oc-
cur.
17 Local Services bintec elmeg GmbH
492 bintec RS Series
To Next Page
Loading...
