Field Description
Select the desired wireless network whose status shall be
changed.
Set status
Only if Command Type = 21 or 2068 E
Select the status for the wireless network.
Possible values:
• 3% (default value)
• 5%
Source Location
Only if Command Type = $7 .+
Select the source for the software update.
Possible values:
• 6 $7 $ .+ (default
value): The latest software will be downloaded from the up-
date server.
• @** : The latest software will be downloaded from
an HTTP server that you define in .A0.
• @** : The latest software will be downloaded from
an HTTPS server that you define in .A0.
• *<* : The latest software will be downloaded from
an TFTP server that you define in .A0.
Server URL
Where Command Type = $7 .+ if Source Loc-
ation not 6 $7 $ .+
Enter the URL of the server from which the desired software
version is to be retrieved.
Where Command Type = 6$#
'# with Action = + %$# or ?
+ %$#
Enter the URL of the server from which a configuration file is to
be retrieved, or on which the configuration file is to be backed
up.
File Name
For Command Type = $7 .+
bintec elmeg GmbH
17 Local Services
bintec RS Series 495
To Next Page
Loading...
