Fig. 193: Local Services->Surveillance->Ping Generator->New
The menu Local Services->Surveillance->Ping Generator->New consists of the follow-
ing fields:
Fields in the Basic Parameters menu.
Field Description
Destination IP Address Enter the IP address to which the ping is automatically sent.
Source IP Address Enter the source IP address of the outgoing ICMP echo request
packets.
Possible values:
• 3%: The IP address is determined automatically.
• +%$% (default value): Enter the IP address in the adja-
cent input field e.g. to test a particular extended route.
Interval Enter the interval in seconds during which the ping is sent to the
address specified in Remote IP Address.
Possible values are to &.
The default value is .
Trials
Enter the number of ping tests to be performed until Destina-
tion IP Address as .%"1 applies.
The default value is &.
bintec elmeg GmbH
17 Local Services
bintec RS Series 511
To Next Page
Loading...
Need help?
General
