Field Description
SMTP Server
Enter the address (IP address or valid DNS name) of the mail
server to be used for sending the mails.
The entry is limited to 40 characters.
SMTP Port
Encryption of e-mails (SSL / TLS).
The field SMTP Port is per default preset to and SSL En-
cryption is enabled.
SMTP Authentication
Authentication expected by the SMTP server.
Possible values:
• ) (default value): The server accepts and send emails
without further authentication.
• '*: The server only accepts e-mails if the router logs in
with the correct user name and password.
• '* $ -: The server requires that e-mails are
called via POP3 by the sending IP with the correct POP3 user
name and password before sending an e-mail.
User Name
Only if SMTP Authentication = '* or '* $ -
Enter the user name for the POP3 or SMTP server.
Password
Only if SMTP Authentication = '* or '* $ -
Enter the password of this user.
POP3 Server
Only if SMTP Authentication = '* $ -
Enter the address of the server from which the e-mails are to be
retrieved.
POP3 Timeout
Only if SMTP Authentication = '* $ -
Enter how long the router must wait after the POP3 call before it
is forced to send the alert mail.
The default value is seconds.
Fields in the SMS Parameters menu (for devices with UMTS only)
19 External Reporting bintec elmeg GmbH
560 bintec RS Series
To Next Page
Loading...
