Field Value
RSA Key Status Shows the status of the RSA key.
If an RSA key has not been generated yet, ) # is
displayed in red and a link, , is provided. If you select
the link, the generation process is triggered and the view is up-
dated. The # status is displayed in green. When
generation has been completed successfully, the status
changes from # to . If an error occurs
during the generation, ) # and the link
are displayed again. You can then repeat generation.
If the .97 status is displayed, generation of a key is not
possible, for example because there is not enough space in the
FlashROM.
The status is ) # by default.
DSA Key Status Shows the status of the DSA key.
If no DSA key has yet been generated, ) # is dis-
played in red and a link, , is provided. If you select
the link, the generation process is triggered and the view is up-
dated. The # status is displayed in green. When
generation has been completed successfully, the status
changes from # to . If an error occurs
during the generation, ) # and the link
are displayed again. You can then repeat generation.
If the .97 status is displayed, generation of a key is not
possible, for example because there is not enough space in the
FlashROM.
The status is ) # by default.
The menu Advanced Settings consists of the following fields:
Fields in the menu Advanced Settings
Field Value
Login Grace Time
Enter the time (in seconds) that is available for establishing the
connection. If a client cannot be successfully authenticated dur-
ing this time, the connection is terminated.
The default value is seconds.
5 System Management bintec elmeg GmbH
78 bintec RS Series
To Next Page
Loading...
