9 Init Button
Press and hold down this button with something pointed to initialize the TeraStation’s admin username and
password, two-factor authentication settings, IP settings, SSL, and service port restriction settings to their
factory default values. The effects of this button can be changed in Settings.
During initialization, the TeraStation will beep and the I23 message will appear as a notification. When
initialization finishes, the I23 message will disappear.
10 Status LEDs
Normally, these LEDs blink green when drives are accessed. If a drive fails, its LED will turn red.
11 Fan
Spins to prevent overheating inside. Do not block the fan.
12 USB Port
Compatible USB drives, USB memory devices, and USB UPS devices can be connected. USB hubs are not
supported.
13 LAN Port 1 (1GbE)
Connect an Ethernet cable to use this port for your network. It is available for communicating at max. 1000
Mbps.
14 LAN Port 2 (2.5GbE)
Connect an Ethernet cable to use this port for your network. It is available for communicating at max. 2.5 Gbps
if using the included Ethernet or category 6A cable.
Note: To communicate at up to 2.5 Gbps, all network devices must be compatible with 2.5GbE.
15 Power Connector
Use the included power cable to connect to a UPS, surge protector, or outlet.
16 Anti-Theft Security Slot
Use this slot to secure your TeraStation with a cable lock (not included).
17 Serial Number
This sticker shows the TeraStation’s serial number.
18 UID Button
Press this button to cycle the blue LED on and off.
19 Link/Act LED
Glows green when the TeraStation is connected to a network. It blinks when the connection is experiencing
activity.
20 Link/Act LED
Glows amber when the TeraStation is connected to a network at 100 Mbps or 2.5 Gbps. It blinks when the
connection is experiencing activity.
21 Link/Act LED
Glows green when the TeraStation is connected to a network at 1000 Mbps. It blinks when the connection is
experiencing activity.
Turning the TeraStation On and Off
Press the power button on the TeraStation to turn it on.
18
Chapter 2 Getting Started
To Next Page
Loading...
