4 Click Delete RAID Array.
5 The “Confirm Operation” screen will open. Enter the confirmation number, then click OK.
6 The process is complete once you close the confirmation window that appears.
When the drives are put into JBOD, next create a shared folder by referring to the “Adding a Shared Folder” section in
chapter 3.
Creating a RAID Array
Before creating a new RAID array, first put the drives into JBOD by referring to the “Using JBOD” section above. Then,
follow the procedure below.
1 From Settings, click Storage.
2 Click the settings icon ( ) to the right of “RAID”.
52
Chapter 4 RAID Modes and Drive Management
To Next Page
Loading...
