7 The format will begin. Wait until it finishes.
8 The process is complete when formatting finishes and the TeraStation is added to Boot Authentication Tool.
Note: To activate, deactivate, or change the boot authentication settings, the TeraStation must be communicating
with the authentication server.
If the TeraStation Cannot Be Accessed
If the TeraStation cannot communicate with the authentication server or vice versa, such as in a case of network
failure, the TeraStation will not be accessible. If the TeraStation is not accessible, manually authenticate the
TeraStation by following the procedure below.
Note: The procedure defines an “authentication server administrator” as someone who manages the authentication
server using Boot Authentication Tool, and a “user” as one attempting to access the TeraStation from a remote
location.
208
Chapter 7 Security Enhancement
To Next Page
Loading...
