Canon LBP352 - Page 330

7
Click [OK].
● Key and Certicate Signing Request (CSR) may take approximately 10 to 15 minutes to generate.
8
Click [Store in File].
● A dialog box for storing the le appears. Choose where to store the le and click [Save].
➠
The Key and Certicate Signing Request (CSR) le is stored on the computer.
9
Attach the stored le and submit the application to the certication authority.
◼
Register the digital certicate issued by the certication authority.
You cannot use the key pair generated by the Certicate Signing Request (CSR) until the certicate is registered. Once
the certication authority has issued the digital certicate, register it using the procedure below.
1
Start the Remote UI and log on in Management Mode. Starting Remote UI(P. 333)
2
Click [Settings/Registration].
3
Click [Security] [Key and Certicate Settings].
4
Click [Key Name] or [Certicate] for the certicate to be registered.
Security
323