SD Card Maintenance
*
When an error occurs in an SD card or when you want to discard an SD card, you can erase all the data stored on that
card.
Format
Initializes the SD card. All the stored data is erased from the card.
( ) <User Maintenance> <SD Card
Maintenance> <Format> <Yes>
Completely Del. Data
All the stored data is erased from the SD card. Perform this operation as necessary, such as when you want to
discard an SD card after erasing all the stored data including those fragments that cannot be erased normally.
Deleting All Data in an SD Card(P. 585)
Special Print Mode
Provides items you can set when printing cannot be performed properly.
Reduce Ppr. Sticking
In 2-sided printing, printed paper may stick to each other depending on the image density of print data. In this
case, setting this item may solve the problem. However, the printing speed may be slower.
Off
On
( ) <User Maintenance> <Special Print Mode> <Reduce Ppr.
Sticking> <Off> or <On>
Special Print Adj. C
Set this item to <On> when printing noise is noticeable.
Off
On
( ) <User Maintenance> <Special Print Adj. C> <Off> or <On>
Setting Menu List
410
To Next Page
Loading...
