12
Close the cover of the multi-purpose tray.
13
Install the toner cartridge.
● Make sure to push in the cartridge until it stops.
14
Close the top cover.
When the envelope feeder had been installed
1
Replace the envelope feeder back in place.
2
Close the top cover.
When the message is still displayed
● Paper may be jammed in other locations. Check other locations, and remove jammed paper if any. If the
message is still displayed, check whether the top cover is securely closed.
Paper Jams in the Optional Envelope Feeder
When paper is loaded in the envelope feeder, rst remove the loaded paper before starting the following procedure. If
the jammed paper cannot be removed easily, do not forcibly remove it from the machine, but follow the procedure for
another location indicated by the message.
Troubleshooting
477
To Next Page
Loading...
