51 Print settings error.
Printing data containing an unavailable paper type or width has been attempted with <Resolution> set
to <1200 dpi>.
● Set <Resolution> to <600 dpi> and print the data again. Resolution(P. 399)
● Press ( ) to cancel the print job since the data is not available for printing.
55 SD Card error.
An error has occurred in the SD card.
● Shut down the machine, remove the SD card, and install it again.
Turning ON/OFF the Power(P. 33)
Installing an SD Card(P. 583)
● You can press ( ) to continue printing, but <SD Card> will be changed to <Off>. SD
Card(P. 369)
56 SD Card error.
An error has occurred in the SD card.
● Shut down the machine, wait for 10 seconds or more, and turn ON the power again.
Turning ON/OFF the Power(P. 33)
● Format the SD card.
SD Card Maintenance(P. 410)
80 Initializing MEAP. Do not turn power OFF.
You have tried to shut down the machine while MEAP was being initialized.
● When the MEAP initialization is complete, this message is automatically removed. Wait until the message
is removed.
80 Preparing MEAP... Do not turn power OFF.
You have tried to shut down the machine while MEAP was preparing for operation.
● When MEAP is ready for operation, this message is automatically removed. Wait until the message is
removed.
A4 nn Error (nn: 2-digit alphanumeric)
An abnormality has occurred in the machine, resulting in malfunction.
● Shut down the machine, wait for 10 seconds or more, and turn ON the power again.
Turning ON/OFF the Power(P. 33)
A5 nn Error (nn: 2-digit alphanumeric)
An abnormality has occurred in the machine, resulting in malfunction.
Troubleshooting
481
To Next Page
Loading...
