Canon LBP352 - Common Problems

The login name to be used for IEEE802.1X authentication is not specied.
● The login name to be used for IEEE802.1X authentication is not specied. Specify the login name.
IE The certicate has expired.
The certicate received from the authentication server has been found to have expired during
IEEE802.1X authentication.
● Check the certicate of the authentication server.
● Check the time settings in the machine and authentication server.
Date/Time Settings(P. 367)
IE The certicate is incorrect.
An error has occurred as a result of verication of the certicate received from the authentication server
by using the CA certicate during IEEE802.1X authentication.
● Check the certicate of the authentication server.
● Install the CA certicate in the machine.
Using CA-issued Key Pairs and Digital Certicates(P. 326)
IEEE802.1X error. Set the necessary auth. information.
The information specied for IEEE802.1X authentication is not sucient.
● Check the IEEE802.1X settings, and specify the settings properly.
Conguring IEEE 802.1X Authentication(P. 309)
Image browse data error.
The TIFF data contains data that the machine cannot process while receiving.
● Set <TIFF Spooler> to <On>, and print the le again. If the le size exceeds 40 MB, install an SD card.
TIFF Spooler(P. 427)
Installing an SD Card(P. 583)
● Because the data cannot be printed, press ( ) to cancel the print job.
Image data error.
The TIFF or JPEG data contains data that is not available for the machine.
● Because the data cannot be printed, press ( ) to cancel the print job.
Insert toner cartridge.
The toner cartridge is not set or properly set.
● Properly set the toner cartridge.
How to Replace Toner Cartridges(P. 524)
Key management le is corrupt or deleted.
Files related to key management are damaged.
● Restart the machine, regenerate or reinstall the key and certicate, and then specify the TLS settings.
Turning ON/OFF the Power(P. 33)
Troubleshooting
490