4
Insert the paper into the multi-purpose tray until the paper stops.
● Insert the paper with the print side face up.
● Fan the paper stack well, and tap it on a at surface to align the edges.
Do not exceed the load limit guide when loading paper
● Make sure that the paper stack does not exceed the load limit guide ( ). Loading too much paper can
cause paper jams.
● When loading envelopes or paper with a logo, see Loading Envelopes(P. 53) or Loading Preprinted
Paper(P. 55) .
5
Align the paper guides against the edges of the paper.
● Slide the paper guides inward until they are aligned securely against the edges of the paper.
Align the paper guides securely against the edges of the paper
● Paper guides that are too loose or too tight can cause misfeeds or paper jams.
»
Continue to Specifying Paper Size and Type in the Multi-Purpose Tray(P. 63)
When changing the paper size or type
Basic Operations
45
To Next Page
Loading...
