● The factory default setting for paper size is <A4>. If you load a different size or type of paper into the
machine, make sure to change the settings. If you do not change the settings, a paper jam or printing
error may occur.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
multi-purpose tray, with the side to print face up (previously printed side face down).
● When you want to print on the back side of the paper that is already printed, set <Manual 2-Sided (MP)> to
<2nd Side> in the setting menu of the operation panel. Manual 2-Sided (MP)(P. 458)
● Load one sheet of paper each time you print.
● You can use only the paper printed with this machine.
● You cannot print on the side that has previously been printed on.
LINKS
Paper(P. 569)
Basic Operations
46
To Next Page
Loading...
