● When you want to install an SD card at the same time, proceed to Installing an SD Card(P. 583) .
◼ Checking that Barcode Printing Kit-F1 Is Properly Installed
Print the
Conguration Page(P. 445) , and conrm that "BarDIMM" is
displayed in "PCL"
If "BarDIMM" is displayed, the ROM is properly installed.
If "BarDIMM" is not displayed
● The ROM is not installed properly. Remove the ROM from the machine, and
reconnect it.
Appendix
582
To Next Page
Loading...
