SECTION 00 - GENERAL INFORMATION - CHAPTER 1
00-2
FOREWORD
Appropriate service methods and correct repair procedures are essential for the safe, reliable operation of all
equipment, as well as the personal safety of the individual performing the repair.
This Repair Manual provides troubleshooting and overhaul instructions using recommended procedures and
equipment. Following these instructions will ensure the safe, efficient, and timely completion of the service or
repair.
The manual is divided into sections which are subdivided into chapters. Each chapter contains information on
general operating principles, detailed inspection, overhaul and, where applicable, specific troubleshooting, spe-
cial tools, and specifications.
Any reference in this manual to right, left, rear, front, top, or bottom is determined by standing behind the machine
and looking in the direction of travel.
All data and illustrations in this manual are subject to variations in build specification. This information was correct
at the time of issue, but Case IH policy is one of continuous improvement, and the right to change specifications,
equipment, or design at any time, without notice, is reserved.