SECTION 00 - GENERAL INFORMATION - CHAPTER 1
00-25
Rolls
Type Steel or rubber...........................................................
with intermeshing spirals
Length 2591 mm (102 in).........................................................
Diameter 264 mm (10.38 in).......................................................
Speed 635 RPM..........................................................
Travel Speed 0 to 14 KPH (0 to 9 MPH)......................................................
Capacity 2.5 H/hr (6.1 A/hr) @ 10 KPH..........................................................
(6 MPH) and 80% field efficiency
Tire 11L x 15, 6-ply tubeless...............................................................
agricultural implement tire
Jack Side-wind..............................................................
Tongue Swing Hydraulic.....................................................
SPECIAL TOOLS
Cutter bar removal holding tool
Cutter bar removal wrench attachment
Cutter bar reassembly lubricant
Disc bearing cover
To Next Page
Loading...
