4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 4-65
Setup Menu: Outputs, Continued
Cue Tone Test
Description: Specify the cue tone digits you want to test locally.
Parameters: 000 to 999.
Mode
Description: Specify what to test in sequence.
Parameters: * for Start Tone and # for End Tone.
Run Test
Description: Verifies the cue tone test according to the Cue Tone Test and Mode
set above.
Parameters: Yes or No.
M1/M2
M1 Port Type
Description: This option allows the operator to set the output format for the M1
port.
Parameters: ASI, SDI.
M2 Port Type
Description: This option allows the operator to set the output format for the M2
port.
Parameters: ASI, SDI.