4-70 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Setup Menu: Outputs, Continued
Output Mode
Description: This selects the DPM output mode.
Parameters: No Output, Passthrough, Service Chans Only, MAP Passthrough,
MAP Svc Chans Only or Full DPM Control.
Descramble Mode
Description: This parameter selects whether the receiver should scramble the
output even if it is authorized to receive the channel.
Parameters: Scrambled, Descrambled. Default is Descrambled.
Output Mode Description
No Output No MPEGoIP output will be generated.
Passthrough The output will be identical to the input.
The output channel will not be modified.
PE/PID remapping options, PSI
regeneration and User Rate are not
supported in this mode.
Service Chans Only Only service channels will be output.
MAP Passthrough The output will be identical to the input,
except that it will be generated using the
DPM and PID mapping settings.
MAP Svc Chans
Only
Only service channels will be output
according to the DPM and PID mapping
settings.
Full DPM Control The output will be generated according to
the DPM setting.
Descramble
Mode
Description
Scrambled Scrambles the output channel even if the PE
is authorized and can descramble the
channel.
Descrambled Descrambles the output channel, and passes
in-the-clear channels.
To Next Page
Loading...
