Cisco D9854 User Manual

6-14 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
APP Invalid Application SW
cannot be read
from memory
correctly.
Clear BOOT passed
Decoder
Processor Start
Set DB Startup failed Cause: Hardware
issue.
Remedy: Clear
alarms, reset the unit,
and notify customer
service if the problem
persists.
Transfer of
operational
parameters to
secondary
processor failed.
Major
No Response Secondary
processor not
responding.
Synchronization
Failure
Communication
with secondary
processor failing.
LEC Timeout Set LEC Table Missing/
timeout:channels
currently unavailable
Cause: Possible LEC
Server or Uplink
issue.
Remedy: If using RF
input, contact the
content provider. If
using ASI output,
ensure the source has
not been changed for
the content provider.
Clear alarm and
notify customer
service if the problem
persists.
ECT Table is not
received in the
GDS stream.
Clear LEC received
Alarm Message
Type
Message Cause/Remedy Description Severity

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C