EasyManua.ls Logo

Cisco WS-C6506 - Page 341

Cisco WS-C6506
1488 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13-23
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 13 Configuring CEF for PFC2 and PFC3A
Configuring CEF for PFC2/PFC3A on the Switch
MLS Multicast statistics:
Flow install Ack:9
Flow install Nack:0
Flow update Ack:2
Flow update Nack:0
Flow delete Ack:0
Complete flow install Ack:10
Complete flow install Nack:0
Complete flow delete Ack:1
Input VLAN delete Ack:4
Output VLAN delete Ack:0
Group delete sent:0
Group delete Ack:0
Global delete sent:7
Global delete Ack:7
L2 entry not found error:0
Generic error :3
LTL entry not found error:0
MET entry not found error:0
L3 entry exists error :0
Hash collision error :0
L3 entry not found error:0
Complete flow exists error :0
This example shows how to display information on a specific IP MMLS entry on MSFC2/MSFC3:
Router# show mls ip multicast 224.1.1.1
Multicast hardware switched flows:
(1.1.13.1, 224.1.1.1) Incoming interface: Vlan13, Packets switched: 61590
Hardware switched outgoing interfaces: Vlan20 Vlan9
RFD-MFD installed: Vlan13
(1.1.9.3, 224.1.1.1) Incoming interface: Vlan9, Packets switched: 0
Hardware switched outgoing interfaces: Vlan20
RFD-MFD installed: Vlan9
(1.1.12.1, 224.1.1.1) Incoming interface: Vlan12, Packets switched: 62010
Hardware switched outgoing interfaces: Vlan20 Vlan9
RFD-MFD installed: Vlan12
(1.1.12.3, 224.1.1.1) Incoming interface: Vlan12, Packets switched: 61980
Hardware switched outgoing interfaces: Vlan20 Vlan9
RFD-MFD installed: Vlan12
(1.1.11.1, 224.1.1.1) Incoming interface: Vlan11, Packets switched: 62430
Hardware switched outgoing interfaces: Vlan20 Vlan9
RFD-MFD installed: Vlan11
(1.1.11.3, 224.1.1.1) Incoming interface: Vlan11, Packets switched: 62430
Hardware switched outgoing interfaces: Vlan20 Vlan9
RFD-MFD installed: Vlan11
Total hardware switched installed: 6
Router#
This example shows how to display a summary of IP MMLS information on MSFC2/MSFC3:
Router# show mls ip multicast summary
7 MMLS entries using 560 bytes of memory
Number of partial hardware-switched flows:2
Number of complete hardware-switched flows:5
Router#

Table of Contents

Related product manuals