ComAp InteliDrive Lite - AUT Mode: Load Limitation; Overview of Load Limitation

InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
15
2. Enter controller address and further information depending on the selected connection type.
FOR DIRECT CONNECTION ENTER CONTROLLER ADDRESS
FOR INTERNET CONNECTION ENTER CONTROLLER ADDRESS, IP ADDRESS OF THE IB-LITE MODULE
FITTED IN THE CONTROLLER YOU WANT TO REACH, ACCESS CODE
3. You will see the Control window and you can continue with configuration of Setpoint, inputs,
outputs etc.
LITEEDIT CONTROL WINDOW