Comtec CDM-840 - Page 187

CDM-840 Remote Router MN-CDM840
Serial-based Remote Product Management Revision 3
7–19
Parameter
Type
Command
(Instruction
Code
& Qualifier)
Number of
Arguments for
Command or
Response to Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code &
Qualifier)
Response to Query
(Target to Controller)
BUC PLL
Lock
N/A
1 byte
Query only.
NOTE: VALID ONLY WHEN THE FSK AND BUC POWER ARE ON.
Returns the BUC Phase Lock Loop in the form x, where:
0=Locked
1=Unlocked
9=Not connected
EXAMPLE: <0/BPA?[cr]
>0000/BPA=1[cr][lf]
N/A
BPA?
BPA=x
(see Description of
Arguments)
BUC Power
Class
N/A
2 bytes
Query only.
NOTE: VALID ONLY WHEN THE FSK AND BUC POWER ARE ON.
Returns the power level, in watts, for C-Band and Ku-Band in the form xx,
where:
1=2 watts
2=4 watts
3=5 watts
4=8 watts
5=10 watts
6=16 watts
7=20 watts
8=25 watts
9=40 watts
10=60 watts
EXAMPLE: <0/BPC?[cr]
>0000/BPC=10[cr][lf]
N/A
BPC?
BPC=xx
(see Description of
Arguments)
BUC Power
Supply
enable
BPS=
1 byte
Command or Query.
Sets or returns the BUC Power Supply control in the form x, where:
0=Disable
1=Enable
EXAMPLE: <0/BPS=1[cr]
BPS=
BPS?
BPS*
BPS#
BPS?
BPS=x
(see Description of
Arguments)
BUC
Software
Version
N/A
2 bytes
Query only.
NOTE: VALID ONLY WHEN THE FSK AND BUC POWER ARE ON.
Returns the BUC Software Version in the form xx, where:
xx=0 or 15
EXAMPLE: <0/BSV?[cr]
>0000/BSV=15[cr][lf]
N/A
BSV?
BSV=x
(see Description of
Arguments)