Illustrations
The illustrations used in the ″Repair Sections″ of this
manual are intended to give an example of a problem and
to show what to look for and where the problem can be
found. Some of the illustrations are ″generic″ and might
not look exactly like the engine or parts used in your
application. The illustrations may contain symbols to in-
dicate an action required and an acceptable or not ac-
ceptable condition.
The illustrations are intended to show repair or replace-
ment procedures with the engine ″in-chassis.″ The il-
lustration can differ from your application, but the pro-
cedure given will be the same.
Section i - Introduction Illustrations
N14 Page i-7
To Next Page
Loading...
