High Oil Pressure Relief Valve Retainer 6.48 mm MIN 0.255 in
Plug Installed Depth 2-14 6.98 mm MAX 0.275 in
Lubricating Oil Pump Drive Shaft End
Clearance 2-13 0.051 mm MIN 0.002 in
0.203 mm MAX 0.008 in
Lubricating Oil Pump DFC Signal Line
Orifice (in Lubricating Pump Cover) 2-16 1.0 mm DIAMETER 0.040 in
Lubricating System Torque Values
Crankcase Breather Tube 2-15
• Hose Clamps 5 N•m 40 in-lb
• Tube Bracket Mounting Capscrew 47 N•m 35 ft-lb
Dipstick Tube Housing Mounting Capscrew 2-09 47 N•m 35 ft-lb
Hydraulic (Power Steering) Pump
Mounting Flange Cover Plate Capscrew
(on Lubricating Pump Cover) 2-13 27 N•m 20 ft-lb
Lubricating Oil Cooler Assembly Mounting
Capscrews 2-19 47 N•m 35 ft-lb
Component Specifications and Torque Values Section V - Engine Component Specifications
Page V-8 N14
Component or Assembly (Procedure) Ref.No./Steps Metric U.S.
To Next Page
Loading...
