Confirm that the oil level in the pan is to the full mark.
Operate the engine, until the water temperature reaches
82°C [180°F]. Check the oil pressure and check for leaks.
Lubricating Oil Leaks (2-04)
Use a steam cleaner or a high pressure washer to clean
the engine.
Check the engine crankcase breather element, hose, and
tube for restriction. Refer to Procedure 2-05.
Check for a loose or missing oil dipstick tube, dipstick, or
oil filler cap.
Lubricating Oil Leaks (2-04) Section 2 - Lubricating System
N14Page 2-20
To Next Page
Loading...
