EasyManua.ls Logo

CUMMINS N14 - Lubricating Oil Pressure - Low

CUMMINS N14
812 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lubricating Oil Pressure - Low
Cause Corrections
----------
Oil Level Incorrect
OK
f
Add or drain engine oil. Refer to Proce-
dures 2-06 and 2-07. Check dipstick
calibration. Refer to Procedure 2-10.
----------
External Oil Leaks
OK
f
Visually inspect for oil leaks. Repair as
necessary.
----------
Oil Pressure Switch/Gauge/Sensor
Malfunctioning or Incorrect Location
OK
f
Verify the pressure switch/gauge/sensor is
functioning correctly. Refer to Procedure
2-21.
----------
Engine Angularity or Power Angle
Exceeding Limit
OK
f
Check power angle in vehicle. Check
terrain where low oil pressure occurs.
Refer to specifications.
----------
Oil Does Not Meet specifications
OK
f
Change oil and filters and check oil
specifications. Refer to the N14 Operation
and Maintenance Manual, Bulletin No.
3666024.
----------
Oil Temperature Above Specification
(120°C [250°F])
OK
f
Refer to ‘‘Lubrication Oil Temperature
Above Specification’’ Symptom Chart.
----------
Oil Contaminated With Coolant or Fuel
OK
f
Refer to ‘‘Lubricating Oil Contami-
nated’’ Symptom Chart.
(Continued)
Troubleshooting Symptoms Charts SectionT-Troubleshooting
N14Page T-88

Table of Contents

Other manuals for CUMMINS N14

Related product manuals