Install the oil cooler core mounting gaskets and holddown
capscrews.
Tighten the holddown capscrews.
Torque Value: 27 N•m [20 ft-lb]
Alternately tighten the connection retainer capscrews.
Torque Value: 47 N•m [35 ft-lb]
Installation - Lubricating Oil Cooler Assembly
Install two guide studs in the oil cooler support mounting
holes in the cylinder block.
Install a new oil cooler support gasket over the guide
studs.
For those engine applications utilizing the low mount oil
cooler arrangement follow this installation procedure.
Lubricating Oil Cooler Assembly (2-19) Section 2 - Lubricating System
N14Page 2-60
To Next Page
Loading...
