30.0 CFM Two Cylinder Air Compressor (ST676)
Cylinders .........................................................................................................................................................2
Compressor Swept Volume @ 1250 RPM ..............................................................14.2 L per sec. [30.00 CFM]
Piston Displacement............................................................................................................676 cc [41.3 C.I.D.]
Bore ..................................................................................................................................92.08 mm [3.625 in.]
Stroke ...................................................................................................................................50.8 mm [2.00 in.]
Speed..........................................................................................................................................Engine Speed
Cooling......................................................................................................................................Engine Coolant
Lubrication......................................................................................................................Engine Lubricating Oil
Plumbing Line Sizes
Coolant Inlet and Outlet (Pipe Fitting) ..........................................................12.70 mm NPTF [0.50 in. NPTF]
Air Inlet (Inside Diameter) ..............................................................................................22.22 mm [0.875 in.]
Air Outlet (Minimum Inside Diameter) ............................................................................15.88 mm [0.625 in.]
Height, Overall (Approximate)...............................................................................................34.3 cm [13.50 in.]
Width, Overall (Approximate) ..................................................................................................17.8 cm [7.00 in.]
Length, Overall (Approximate) ..............................................................................................28.7 cm [11.30 in.]
Weight (Approximate) ..........................................................................................................33.5 kg [74.50 lbs.]
NOTE: In applications where duty cycles average 10 percent or more, or air pressures are above 862 kPa [125 psi];
use a discharge line with a minimum inside diameter of 19 mm [0.75 inch] to prevent carbon buildup. Examples of these
applications are as follows: refuse trucks, pickup and delivery trucks, transit buses and equipment with high accessory
air usage.
Compressed Air System Specifications Section 4 - Compressed Air System
N14Page 4-6
To Next Page
Loading...
