Install a new o-ring seal, the clamp, and the discharge
elbow to the turbocharger.
Tighten the clamps.
Torque Value: 8.5 N•m [75 in-lb]
Install a new gasket, oil drain tube, and capscrews.
Tighten the capscrews.
Torque Value: 44 N•m [32 ft-lb]
Pour 50 to 60 cc [2.0 to 3.0 ounces] of clean engine oil
in the turbocharger oil supply opening.
If installing a new turbocharger, install the male union
elbow.
Torque Value: 30 N•m [22 ft-lb]
Install the turbocharger oil supply hose on the elbow.
Torque Value: 30 N•m [22 ft-lb]
Section 3 - Combustion Air System Turbocharger Replacement (3-08)
N14 Page 3-21
To Next Page
