After the CAC has been thoroughly cleaned of all oil and
debris with solvent, wash the CAC internally with hot
soapy water to remove the remaining solvent. Rinse thor-
oughly with clean water.
Blow compressed air into the CAC in the opposite direc-
tion of normal air flow until the CAC is dry internally.
Visually inspect the CAC for cracks, holes or damage.
Inspect the tubes, fins and welds for tears, breaks or other
damage. If any damage causes the CAC to fail the air leak
check mentioned earlier in this procedure, the CAC must
be replaced.
Install the CAC on the vehicle.
Charge Air Cooler (3-11) Section 3 - Combustion Air System
N14Page 3-32
To Next Page
Loading...
