206 Error Codes AccuVision
®
AV6010 Long-Range Camera System Manual
Accu-Sort Systems, Inc. A6-AV6010_Error_Codes_R10.doc
Software Error Codes
Error Code Description
Software Critical Errors
1001-1034 SW Init Failure: xxxxxxxx
Note: Because the system did not boot, these errors are not displayed on the user
interface nor do they appear in the debug log. Normal course of action is rebooting
the system.
Software Serious Errors
2001 Info: Unable to set 'Send Socket' buffer size
2002 Info: Unable to set 'Receive Socket' buffer size
2003 Info: Unable to write to socket
2004 Info: Unable to read from socket
2005 Info: Unable to write to message queue
2006 Info: Unable to read from message queue
2007 Info: Unable to stop FTP Server
2008 Info: Unable to stop TFTP Server
2009 Info: Unable to stop DHCP Server
2010 Info: Unable to disable port of network switch
2011 Info: Unable to create VLAN in network switch
2012 Info: Unable to assign static IP to SYNC network
2013 Info: Unable to assign static IP to IMAGE network
2014 Info: Unable to assign static IP to HOST network
2015 Info: Unable to start DHCP client on SYNC network
2016 Info: Unable to start DHCP client on IMAGE network
2017 Info: Unable to start DHCP client on HOST network
2018 Info: Unable to assign netmask to SYNC network
2019 Info: Unable to assign netmask to IMAGE network
2020 Info: Unable to assign netmask to HOST network
2021 Info: Unable to assign gateway to SYNC network
2022 Info: Unable to assign gateway to IMAGE network
To Next Page
Loading...
Need help?
General
