AccuVision
®
AV6010 Long-Range Camera System Manual Chapter 5 93
05-AV6010_Setup_R10.doc Accu-Sort Systems, Inc.
AV6010 Install Wizard
Use the AV6010 Install Wizard application as a simplified method of
determining the mounting information needed in the AV6010 user interface
under the Mounting > Ranger and Mounting > Camera setup screens.
Based on your application, there can be several auto calibration wizards
made available through the AV6010 Install Wizard application including the
RangeFinder and one for each camera in the system.
Prerequisites: You will need to establish a connection with an AV6010
camera before you can download the install wizard.
To download the AV6010 Install Wizard:
1. In the AV6010 user interface, select Diagnostics > Tools.
2. Under Downloads, select InstallWizard.zip.
3. In the File Download dialog box, click Save.
4. Define the location on the C: drive where the wizard will be saved.
It is recommended that you create an Accu-Sort folder in the Program
Files folder on your C: drive (e.g., C:\Program Files\Accu-Sort).
5. Click Save. The ZIP file will take several seconds to download.
6. Click Close when Download Complete appears.
7. Go to the C:\Program Files\Accu-Sort location and open the
InstallWizard.zip file.
8. Double-click AV6010Setup_1.1.3.msi file.
9. The AV6010 Calibration Software Setup Wizard will open in a new
window.
NOTE: If you have previously installed the software, the wizard will offer
the choice to Repair or Remove the software version it found on your
computer.
10. Follow the wizard’s instructions to install the AV6010 Calibration
Software.
11. Once installation is finished, the AV6010 Install Wizard icon should
appear on your desktop.
To Next Page
Loading...
Need help?
General
