208 Error Codes AccuVision
®
AV6010 Long-Range Camera System Manual
Accu-Sort Systems, Inc. A6-AV6010_Error_Codes_R10.doc
AV6010 Camera System
Error
Code
Description Status LED Severity
System Errors
3001 Warning: No response (TFTP ack) from COMe #1. Blink Red Warning
3002 Warning: No response (TFTP ack) from COMe #2. Blink Red Warning
3003 Warning: No response (TFTP ack) from COMe #3. Blink Red Warning
3004 Warning: No response (Release IP ack) from Decoder (COMe) #1. Blink Red Warning
3005 Warning: No response (Release IP ack) from Decoder (COMe) #2. Blink Red Warning
3006 Warning: No response (Release IP ack) from Decoder (COMe) #3. Blink Red Warning
3007 Communication with COMe #1 lost. Solid Red Error
3008 Communication with COMe #2 lost. Solid Red Error
3009 Communication with COMe #3 lost. Solid Red Error
3010 More than maximum allowed COMe modules detected. Solid Red Error
3011 Camera Control Processor (iMX31) failed to boot. Solid Red Error
3012 Communication with Camera Control Processor (iMX31) lost. Solid Red Error
3013 Invalid packet received over serial/Ethernet link. -- Info
3014 Failure in configuration internal network switch. Solid Red Error
3015 Unable to load and start the FPGA. Solid Red Error
3016 Info: Maximum bar codes for a package exceeded. -- Info
3017 Transmit point interrupt error. Solid Red Error
3018 Info: Bar code data received too late. -- Info
3019 Invalid bar code data received from decoder. -- Info
3020 Package database was empty. -- Info
3021 Bar code data received for 'missing package'. -- Info
3022 Bar code data does not match any enabled type. -- Info
3023 Package less than min package size detected. -- Info
3024 Warning: Belt speed detected by all cameras does not match. Blink Red Warning
3025 Warning: More than maximum allowed cameras detected. Blink Red Warning
3026 Warning: Camera with the same name detected. Blink Red Warning
To Next Page
Loading...
Need help?
General
