Datalogic Accu-Sort AccuVision AV6010 - Host Network

AccuVision
®
AV6010 Long-Range Camera System Manual Chapter 5 85
05-AV6010_Setup_R10.doc Accu-Sort Systems, Inc.
Host Network
Use this window to set the host network requirements for your application.
Prerequisites: You will need to know the host network communications
details:
 IP address, gateway and netmask
 Connection type
 Message format
To set the Host Network:
1. Select Setup > Communications > (Camera) > Host Network from the
menu tree. The Host Network window is displayed.
2. IP Address Assignment
3. Host Network Port 1
a. Connection Type
b. Message Format
c. Port Number
d. Keep Alive / Keep Alive Message
4. Repeat Step 3 for Host Network Ports 2 – 4 as required by your
application.
5. Click Update to save any changes.
6. Click Reset to return all parameters to the last values saved.
See also: Setup > Communications > (Camera) > Host Network in Appendix B.
.