134 Troubleshooting AccuVision
®
AV6010 Long-Range Camera System Manual
Accu-Sort Systems, Inc. 08-AV6010_Troubleshooting_R10.doc
Downloads
To download the AV6010 Install Wizard:
1. Login to the AV6010 user interface.
2. Select Diagnostics > Tools in the menu tree.
3. Click InstallWizard.zip in the Downloads section.
4. In the File Download dialog box, click Save.
5. Browse to where you want to save the ZIP file and click Save.
6. Click Close when Download Complete appears.
7. Locate and open the InstallWizard.zip file.
8. Double-click the AV6010Setup_1.1.3.msi file.
(This filename may be different depending on the version on your
system.)
9. Follow the instructions of the AV6010 Calibration Software Setup
Wizard to complete the installation. If a version of the Install Wizard has
already been installed, you’ll be given the choice to Repair or Remove.
10. Once completed successfully, the AV6010 Install Wizard icon appears
on your computer desktop.
(For more information, see AV6010 Install Wizard in Chapter 5, Setup.)
To download and print the Camera Scan Line Target:
Note: This is used with the Camera Install Wizards.
1. Login to the AV6010 user interface.
2. Select Diagnostics > Tools in the menu tree.
3. Click CameraScanLineTarget.pdf. The PDF opens in a new window.
4. To save a copy to your computer, use File > Save As.
5. When printing the camera scan line target, make sure you set the scaling
(page scaling) to None.
(For more information, see AV6010 Install Wizard in Chapter 5, Setup.)
To download and print the Static Focus Target:
Note: This is used with the Camera Install Wizards.
1. Login to the AV6010 user interface.
2. Select Diagnostics > Tools in the menu tree.
3. Click StaticFocusTarget.pdf. The PDF opens in a new window.
4. To save a copy to your computer, use File > Save As.
5. When printing the static focus target, make sure you set the scaling
(page scaling) to None.
(For more information, see AV6010 Install Wizard in Chapter 5, Setup.)
To Next Page
Loading...
Need help?
General
