AccuVision
®
AV6010 Long-Range Camera System Manual Raw Image Export (RIE) 231
A8-AV6010_Raw_Image_Export_R10.doc Accu-Sort Systems, Inc.
AV6010 User Interface Screens related to RIE
When a camera in a system is equipped with RIE capabilities, the Imaging
Network screen for that camera will allow raw image export to be enabled.
After login, go to Setup > Communications > (Camera Name) > Image
Network to view the screen.
Communications > (Camera) > Image Network (RIE Enabled)
Raw Image Export Settings Descriptions
Selection Definition
Raw Image Export (RIE) Settings
Enable/Disable Drop-list to select either enable or disable.
(Currently, a camera reboot is also required.)
RIE Camera Name Allows a unique name to be assigned to the RIE COM-
e module of the camera so it can be identified by the
RIE Destination Server.
(This field is blank by default.)
RIE Local Network Settings
IP Address Enter the IP address for the RIE-equipped camera
Gateway Currently not used
Net Mask Currently not used
RIE Image Destination
IP Address Enter the address for the RIE Destination Server (host)
NOTE: For additional information, see the AccuVision AV6010 RIE API
User Guide (1000069108). This document is provided to all users with
RIE-equipped camera systems. If you did not receive this document,
contact your Accu-Sort sales representative or application engineer.
To Next Page
Loading...
Need help?
General
