can perform switchover by using a DI terminal.
• Group 1: P0.12~ P0.13
• Group 2: P2.03~ P2.04
• Group 3: P2.05~ P2.06
• Group 4: 2.07~ P2.08
Figure 6-1 Acceleration/Deceleration time
P0.14
Acceleration/ Deceleration
time unit
Setting Range：0～2 0
0: 1s; 1: 0.1s 2: 0.01s
To satisfy requirements of different applications, the DGI900 provides three
acceleration/deceleration time units, 1s, 0.1s and 0.01s
NOTE ： Modifying this parameter will make the displayed decimal places change and
corres
ponding acceleration/deceleration time also change.
P0.15 Acceleration/ Deceleration Setting Range：0～2 0
To Next Page
Loading...