Notes:
(1) Filter capacitor or common-mode inductor can be installed between VI and GND terminal
or CI and GND terminal when using analog input mode.
(2) Please use shielded cable and do well grounding, keep the wire as short as possible in
order to prevent external interference when using analog input/o output mode.
3.6.4 Communication Terminal Wiring
The inverter supplies standard RS 485 communication port
It can constitute one master one slave control system or a one master multi slaves system.
The upper computer(PC/PLC)can real time monitor the inverter in the control system and
achieve complicated control function such as remote control and spermatic, etc
(1) Remote control panel can be connected with inverter viaRS485port by plugging in the
remote control panel into RS485 port without any parameter setting. The local control panel
of inverter and remote control panel can work at the same time.
(2) Inverter RS 485 port and upper computer wiring as follow：
To Next Page
Loading...