Need help?Do you have a question about the degdrive DGI900 and is the answer not in the manual?
Check nameplate model and AC drive ratings consistency, and inspect for damage during transport.
Provides precautions for installation, handling, and wiring to prevent danger and injury.
Details environmental requirements and mounting space/direction for inverter installation.
Provides attention notes and danger warnings for proper inverter wiring procedures.
Illustrates the main circuit wiring diagram and describes input/output terminals for different voltage levels.
Defines basic parameters for control mode, frequency source, and rotation direction.
Details parameters for start mode, startup frequency, DC braking, and stop mode.
Details V/F curve settings, torque boost, and slip compensation for motor control.
Explains PID control parameters, including setting source, feedback, and action direction.
Details motor parameters such as type, rated values, resistance, and encoder settings.
Explains parameters for speed/torque control, loop gains, and slip compensation.
Defines parameters for motor overload, overvoltage, overcurrent, and fault protection.
Lists common fault codes, possible reasons, and troubleshooting steps for inverter issues.
Provides methods for resetting the inverter after a fault, including keypad, terminals, and power cycle.
To Next Page
General