0～5555
If it is set to any non-zero number, the password protection function is enabled. After a
password has been set and taken effect, you must enter the correct password in order to
enter the menu. If the entered password is incorrect you cannot view or modify parameters.
If Pd.00 is set to 00000, the previously set user password is
cleared, and the password protection function is disabled
Pd.01
Restore default settings
Setting Range: 0～2 0
0：No operation
1：Restore factory settings except motor parameters
If Pd.01 is set to 1, most function codes are restored to the default settings except motor
parameters, frequency reference resolution, fault records, accumulative running time,
accumulative power-on time and accumulative power consumption.设
2：Clear records
If Pd.01 is set to 2, the fault records, accumulative running time,
accumulative power-on time and accumulative power
consumption are cleared.
Pd.02
AC drive parameter
display property
Setting Range: 0～1111 0011
Unit's digit：Group b display selection 0：Not display；1：Display
Ten's digit ： Group E display selection 0 ： Not display ； 1 ：
Display
Pd.04
Parameter modification
property
Setting Range: 0～1 0
To Next Page
Loading...