degdrive DGI900 - V;F Control Parameter (Group P5)

82
P4.13 AO2 gain -10.00 ～ +10.00 0.01 1.00 ○
P4.14 FMR output
delay time
0.0S ～ 3600.0S 0.1s 0.0s ○
P4.15 Relay 1 output
delay time
0.0S ～ 3600.0S 0.1s 0.0s ○
P4.16 Relay 2 output
delay time
0.0S ～ 3600.0S 0.1s 0.0s ○
P4.17 DO1 output
delay time
0.0S ～ 3600.0S 0.1s 0.0s ○
P4.18 DO2 output
delay time
0.0S ～ 3600.0S 0.1s 0.0s ○
P4.19 DO valid mode
selection
0: Positive logic
1：Negative logic
Unit’s digit：FMR
Ten’s digit：RELAY1
Hundred’s digit：RELAY2
Thousand’s digit：DO1
Ten thousand’s digit：DO2
11111 00000 ○
Group P5: V/F Control Parameters
Function
Code
Parameter
Name
Setting Range Minimum
Unit
Default Property
P5.00 V/F curve setting 0：Linear V/F
1: Multi-point V/F
2: SquareV/F
3:1.2-power V/F
4:1.4-power V/F
6:1.6-power V/F
1 0 ×